|
Below is a foot switch cross-reference guide. Some models listed below
are
not exact equivalents. This is intended as a general guide only. See
the G-Series Foot Switch home page for
specific details about our G-Series foot switches.
The user is responsible to review the specifications and features of each model, as well as the safety
and regulatory requirements of your application, before ordering. Also
review the foot
switch safety warning.
|
|
SSC Model Number
|
Linemaster® Hercules Model
|
Square D® Model Number |
Description/ Rating for SSC Models
|
Info Sheet/ Image |
|
G-Series Heavy-Duty Foot Switch |
|
G500-MO
|
Hercules®
531-SWH,
531-SWHO,
531-SWHOX |
Note: All Square D pedals use double-break switches. The SSC
cross will be the model at the left, but with "-DB" added and will
be rated at 15 amps. 9002AW2, 9002AW1,
9002AW12, 9002AW132 |
momentary, 20 amps @ 125/250 VAC (SPDT) |
G-Series Foot Switch Home Page
download
info sheet
(276kb)
|
|
G500-MA
|
571-DWH,
571-DWHO,
571-DWHOX |
9002AW12 |
maintained, 20 amps @ 125/250 VAC (SPDT) |
|
G500-AT
|
511-B,
511-BO,
511-BOX |
9002AW117 |
anti-trip, 20 amps @ 125/250 VAC (SPDT) |
|
G502-MO
|
532-SWH,
532-SWHO,
532-SWHOX |
9002AW14, 9002AW133, 9002AW13 |
momentary, two switches, single stage, 20 amps @ 125/250 VAC (SPDT) each
switch |
|
G502-MA
|
572-DWH,
572-DWHO,
572-DWHOX |
not applicable |
maintained, two switches, single stage, 20 amps @ 125/250 VAC (SPDT) each
switch |
|
G502-AT
|
511-B2,
511-B2O,
511-B2OX |
9002AW124 |
anti-trip, two switches, single stage, 20 amps @ 125/250 VAC (SPDT) each
switch |
|
G502-MO-2S
|
534-SWH,
534-SWHO,
534-SWHOX |
9002AW6 |
momentary, two switches, dual stage, 20 amps @ 125/250 VAC (SPDT) each
switch |
|
G502-AT-2S
|
511-B2A,
511-B2AO,
511-B2AOX |
9002AW119 |
anti-trip, two switches, dual stage, 20 amps @ 125/250 VAC (SPDT) each
switch |
|
G503-MO (three-switch models) |
533-SWH,
573-DWH, etc. |
not applicable |
20 amps @ 125/250 VAC per switch (all three go off at same time, but can
be adjusted) |
|
G503-MO-3S (3-stage foot switch) |
535-SWH, 575-DWH |
not applicable |
20 amps @ 125/250 VAC per switch (3 stage - each switch goes off at
separate time) |
|
G500-MO-DB (models with "double-break" switches) |
536-SWH, etc. |
not applicable |
contains switches with "double-break" circuitry;
add "-DB" to end of any SSC model number |
|
G500-MO-GT, G500-AT-GT, etc. (models with front gate) |
any gated model, such as Linemaster®
Hercules
511-BG (Anti-Trip with Gate) foot switch |
any gated model |
adds a front gate to the foot switch cover; add "-GT" to end of any SSC
model number |
|
GX500-MO (models with flat cover instead of guard) |
531-SWN
632-S |
not applicable |
available as a variation of all standard G-Series models; model numbers
begin with "GX" |
|
BA-2R62-A4 Switch |
|
|
SSC p/n 11416: 20A @ 125/250 VAC, 1HP @ 125/250 VAC, .5A @ 125VDC, .25A @
230VDC, #6 screw terminals |
|
BGX500 or DG500 |
Linemaster SP Dual models |
not applicable |
dual G-Series foot switch |
|
SSC Model Number
|
Linemaster® Model Number
|
Comparable Model Numbers |
Description/ Rating for SSC Models
|
Info Sheet/ Image |
|
S-Series Light-Duty Foot Switch |
|
S100-1001 |
T-91-SC3
491-SC3
491-S
Linemaster® |
Conntrol®
Series 892
Series 862 |
10 amps @ 125 VAC, momentary (press and hold to keep on) |
S-Series Foot Switch Home Page
download
info sheet (198kb)
|
|
S100-1002 |
T-91-SC36
491-SC36 |
Conntrol®
Series 892
Series 862 |
10 amps @ 125/250 VAC, momentary (press and hold to keep on) |
|
S100-1501 |
T-91-SC3A
971-S |
Conntrol®
Series 892
Series 862 |
15 amps @ 125 VAC, momentary (press and hold to keep on) |
|
S100-1502 |
T-91-SC36A
632-S |
Conntrol®
Series 892
Series 862 |
15 amps @ 125/250 VAC, momentary (press and hold to keep on) |
|
S420-1001 |
T-91-DC3
491-DC3A |
Conntrol®
Series 892
Series 862 |
10 amps @ 125 VAC, maintained (press to turn on, press again for off) |
|
S420-1002 |
T-91-DC36 |
Conntrol®
Series 892
Series 862 |
10 amps @ 125/250 VAC, maintained (press to turn on, press again for off) |
|
S420-1501 |
632-DA |
Conntrol®
Series 892
Series 862 |
15 amps @ 125 VAC, maintained (press to turn on, press again for off) |
|
S420-1502 |
632-DA |
Conntrol®
Series 892
Series 862 |
15 amps @ 125/250 VAC, maintained (press to turn on, press again for off) |
|
DS100 Dual Foot Switch |
|
DS100 and DS100-DG |
TWIN 971-SMC48
TWIN T-91-SC48
TWIN T-91-S
TWIN 491-S
TWIN HT-52-S (20-amp, no
cable)
TWIN 632-S
TWIN 635-S
Linemaster® |
Conntrol®
Series 863 Dual
Series 893 Dual
Series 220
Grainger® 6GPA0, 6GPF4, 6GPD8,
6GPD9
|
13 amps @ 125/250 VAC; each switch is wired normally open |
DS100 Foot Switch Home Page
download info sheet (309kb)
|
|
Potentiometer Foot
Controls |
|
G700, L- or M-Series Potentiometer Foot Control, and C800 TIG Foot
Pedals |
Linemaster® Hercules
Potentiometer Foot Control
500-H
500-H-xxxx
500-AH
500-N
500-N-xxxx
500-AN
500-HO
500-AHO
500-AHOX |
Grainger®
5GWJ7, 4KA16, 4KA17, OHASAA-1K, 4KA18 (see
TIG Foot Controls
homepage)
|
Available in potentiometer resistances of 1000, 5000, 10,000, 25,000, and
other common values. |
Potentiometer Foot
Controls Home Page
L- and M-Series info sheet (206kb)
G700 info sheet (280kb)
|
|
Other References |
|
Grainger® Dayton®-Brand
Foot Switches |
Grainger® Dayton-Brand Light-Duty Foot Switch
6GPA9, 6GPF0, 6GPF1, 6GPF3, 6GPF8, 6GPC4, 6GPD6, 6GPF7, 6GPF9, 6GPG1,
6GPG2, 6GPG5, 6GPG7 -- See Light-Duty
Foot Switches to determine proper model
Grainger® Dayton-Brand Heavy-Duty
Foot Switch: 6GPE3, 6GPA5, 6GPA7, 2ET85, 2ET87, 2ET92, 2ET95, 6GPA4,
6GPA6, 6GPC1, 6GPC6, 6GPC9, 6GPD4, 6GPE2, 6GPE6, 2ET91, 2ET94, 6GPC7,
6GPD0, 6GPD1, 6GPD2, 6GPD3, 6GPE5, 6GPE7, 6GPE8, 2ET89, 2ET90
-- See Heavy-Duty Foot Switches to
determine proper model
Call us today to match any Grainger® foot switch part number
at 1-440-205-1600. Our prices are far lower and most
Grainger® foot switches are imported. Compare our prices with
the Grainger® catalog today. Buy direct
and save! |
|
McMaster-Carr®
Foot Switches |
Call us today to match any McMaster® foot switch part number
at 1-440-205-1600. Compare our prices with
the McMaster® catalog today. Buy direct
and save! |
|
Pizzato® Foot Switches |
Replace your Pizzato® PX or PA
Foot Switch with a heavy-duty G-Series foot switch. Upgrade your
plastic foot switch to the heavy-duty cast-iron and
cast-aluminum construction of the G-Series for low cost. Select
models at the G-Series home page. |
Square D®
and Linemaster® are registered trademarks of
the Schneider Electric Co./ Square D Division
and the Linemaster Switch Corporation, respectively.
Conntrol® is a registered trademark of ConnTrol
International, Inc. Pizzato®
is a registered trademark of
Pizzato Elettrica LLC.
Bernstein® is a registered trademark of
Bernstein AG.
McMaster® and Grainger® are trademarks of McMaster-Carr Supply Company
and W.W. Grainger, Inc., respectively.
See the Foot Switch Selection Guide for more information
about switch operation and switch circuitry. See also:
TIG Foot Control Cross-Reference Guide |
The SSC Controls
Company
8909 East Avenue
Mentor, Ohio 44060
USA
Telephone:
1-440-205-1600
Facsimile:
1-440-205-1700
mail@ssccontrols.com
\ Foot Switch Selection Guide
Miscellaneous and Surplus Sales
Items (Foot Switches)
|
